Conveyor types: large inclination conveyors, corrugated flange conveyors, flange baffle conveyors, mobile conveyors, mobile conveyors, horizontal mobile conveyors and large inclination belt conveyors. The conveyor is the supporting equipment of color tile machinery and is widely used.
1. The frame of this model can be made of stainless steel and aluminum profile. The chain plate can be selected according to the corresponding material and width of the chain plate. Refer to the conveying product - flat chain to select the type.
2. Different forms of flat chains are selected, which can realize various functions such as plane conveying, plane turning, lifting and descending.
3. The motor can be set under or above the frame as needed.
4. Speed adjustment can choose frequency conversion speed regulation or continuously variable speed geared motor.
5. The conveyor can be set up with side baffles, and control station units can be installed on both sides to realize the automation function of the conveying process.
6. When inquiring, please provide the detailed name, size and requirements of the conveyed materials, the material, size, speed, conveying volume requirements of the machine, etc.
The conveyor that uses a scraper chain to pull and transport bulk materials in the trough is called a scraper conveyor. According to the layout and structure of the scraper conveyor chute, it can be divided into two types: parallel type and overlapping type, and according to the number of chains and the arrangement method, it can be divided into four types: single chain, bilateral chain, double center chain and three chain.
The adjacent middle groove of the scraper conveyor can be bent to a limited extent in the horizontal and vertical planes is called a bendable scraper conveyor. Among them, the fuselage is bent at 90 degrees at the intersection of the working face and the transportation roadway, and the working face conveyor is called "corner scraper conveyor".
In the current coal mining face, the role of the scraper conveyor is not only to transport coal and materials, but also to run the track of the shearer, so it has become an indispensable main equipment in the modern coal mining process. The scraper conveyor can maintain continuous operation, and production can be carried out normally. Otherwise, the entire coal face will be shut down, interrupting the entire production.
The main structure and components of various types of scraper conveyors are basically the same, which is composed of three parts: the head, the middle and the tail.
In addition, there are auxiliary components such as hydraulic jack devices for push conveyors and chain tensioners for chain tightening. The head of the machine is composed of the nose frame, the motor, the fluid coupling, the reducer and the sprocket. The middle part is composed of a transition groove, a middle groove, a chain and a scraper. The tail of the machine is a device for the scraper chain to return. The tail of the heavy-duty scraper conveyor, like the head, is also equipped with a power transmission device, which distinguishes the upper and lower heads from the installed position.
1. Solid structure. It can withstand the external force of coal, gangue or other materials.
2. It can adapt to the needs of uneven and bending of the bottom plate of the coal mining face, and can withstand the bending in the vertical or horizontal direction.
3. The fuselage is short and easy to install.
4. It can also be used as a track for shearer operation.
5. It can be reversed to facilitate the handling of bottom chain accidents.
6. It can be used as the fulcrum of the front section of the hydraulic support.
1. The no-load power consumption is large, which is about 30% of the total power.
2. It is not suitable for long-distance transportation.
3. It is easy to drop the chain and jump the chain.
4. It consumes a lot of steel. High cost.
(3) Roller conveyor
