There are many types of buffer rollers, including spring plate type, buffer ring type, strong cushion type, adjustable elastic type, hanging type, etc. The buffer roller is used to slow down the impact of the blanking on the conveyor belt at the receiving place of the belt conveyor, and its toughness is more than 10 times that of ordinary metal.
The installation of the idler should follow certain principles, first of all, to improve the density of the installation, and then to check frequently and replace the damaged idler in time. For conveyor belts with large blanking drops, it is recommended to install a buffer air lock. The dustproof performance, waterproof performance, axial load performance of the roller, the impact resistance of the roller, the service life of the tapered roller, etc. In the selection of the type of roller, we choose the buffer roller where the general material drop is greater than 6 meters, which can not only effectively reduce the impact and wear of the belt by the material, but also prevent the belt from being torn by hard objects In today's continuous development of the roller industry, the length of the service life of the buffer roller determines an important factor in the best-selling level of the roller. So how to extend the service life of the buffer roller, it is necessary to talk about the daily maintenance of the buffer roller, and the service life will naturally be extended if the maintenance is done well.
1. Carefully check the roller seal, the roller seal is the heart of the roller, and the bearing of the roller can maintain vigorous vitality if it is tightly sealed.
2. Oil the roller bearing seat in time.
3. Choose a waterproof conveyor belt according to the situation.
4. On holidays or rests, the buffer roller needs to be taken off from the bracket, which can well prevent the deformation of the buffer roller, once the buffer roller sealing ring is deformed, it is difficult to recover, which will seriously affect the effect of use.
5. About the way of long-term storage of rubber buffer rollers: the surface of rubber buffer rollers is a material that is very easy to be damaged or bruised, and we need newsprint or protective film and other things to wrap it, so that we can keep the rubber buffer rollers from being affected by external factors.
The surface of the buffer roller is very susceptible to the influence of the surrounding environment, such as the humidity and temperature of the air will make the material of the rubber buffer roller change to a certain extent, so we should use a professional cleaning solvent to carefully clean the rubber buffer roller used every day, and place the buffer roller in a ventilated and dark place after cleaning, and wait for 24 hours before putting it into use, so that the use effect of the rubber buffer roller can be well maintained.
Users should pay special attention to the fact that rubber impact rollers should be kept away from products that generate a certain amount of ozone, such as generators, because ozone can pose a fatal threat to rubber impact rollers.
